Rockspace Wifi Extender Setup On Your Tips

Nowadays the increasing dependence on the internet has got everyone demanding better signal strength and wider network coverage. All these demands are taken care of by the extenders and repeaters. The job of wifi extenders or repeaters is to enhance the signal strength and improve the network coverage. So, Rockspace wifi extenders offer a good deal with performing these tasks. For that, you have to perform the Rockspace wifi extender setup. The rockspace setup can be carried out using two methods namely;

• WPS Method
• Web Browser Method

Follow the blog carefully to know how to do Rockspace setup using these two methods.

Easy Steps To Complete Rockspace Wifi Extender Setup Using The WPS Method –

Before initiating the Rockspace wifi extender setup using the WPS push button make sure that both your wifi extender and the wifi router come with a physical push button. Without a WPS button, you cannot perform this method. Follow the steps attentively to know when to press the WPS button and when to release it.

• Step 1: The first step is to plug the Rockspace wifi extender into an electrical socket, then switch on the extender.
• Step 2: A solid blue light indicator will be lit in some time.
• Step 3: Then, check the rear of the wireless router to look for the WPS button and push it.
• Step 4: On the Rockspace wifi extender also, press the WPS button.
• Step 5: Wait patiently, for the WPS LED light to become stable.
• Step 6: After this step, your Rockspace wifi extender setup is complete.

Easy Steps To Complete Rockspace Wifi Extender Setup Using The Web Browser Method –

For setting up the Rockspace wifi extender using the web browser method you just need a smartphone, laptop, or computer. Follow the steps properly to complete the setup;

• Step 1: Start by plugging the extender into a properly functional wall socket. Then wait for the power LED light to become stable.
• Step 2: Now, launch the wifi settings on your smartphone or PC device and tap on ‘rockspace_EXT’ to connect to the extended network.
• Step 3: Then, launch the web browser you use the most and type re.rockspace.local in the address field or enter the IP address, 192.168.0.254.
• Step 4: Once you are on the web page of the extender, you will observe the ‘Create Your Login Password’ tab.
• Step 5: Now, enter your desired password and you are all set to go.

Now you just have to choose your wifi router’s name and fill in the existing router’s password. Tap on the extend button next. Now, a web page will confirm the Rockspace wifi extender’s connection is completed.

Bye, Bye Bad Network!

Once the rockspace wifi extender setup is complete you can start using the extender to extend the signals of the wireless router. While doing the rockspace setup ensure that the power supply is consistent and there are no fluctuations so that the setup is completed successfully. Also, make sure that the network connection is stable and active.